RDL have extensive experience in lining and refurbishment of the following types of tanks: Aluminum / Galvanized cylindrical bolted panel sprinkler and potable water storage tanks.
- Mastic sealed galvanized bolted panel tanks.
- Elevated rectangular sectional GRP/pressed steel tanks.
- Shaped concrete above and below ground basement tanks.
- WRC approved drinking water tanks.
RDL are able to provide a new EPDM or Butyl rubber liner to an existing rubber lined tanks that need a new liner. We are not only able to provide a new replacement liner but also offer an installation service where the old liner is removed and all fixing flanges are replaced along with their respective gaskets, nuts and bolts.
 |
 |
 |
 |
Sump area before
|
Sump area during
|
Sump area after
|
Lining with 1.5mm TPO liner
|
RDL are also able to offer the client the option of installing a low-level manway access hatch to keep in line with today’s Health and Safety regulations.
RDL are also able to offer the refurbishment of an unlined Mastic sealed tank that has shown signs of leaking through the galvanized sheet panels. We will convert the mastic tank to accept an EPDM or Butyl liner. This liner conversion will add an additional 10 years to the life of the tank at a fraction of the price when compared the cost of a new replacement tank.
RDL are also able to offer alternative tank lining materials such as Thermoplastic Polyolefin (TPO) or Polyvinyl Chloride (PVC) liners to suit a situation where the design or shape of a tank would not make the manufacture of the tank feasible in our fabrication warehouse.
RDL are able to offer the client an onsite installation where the liner would be completely fabricated onsite ensuring an exact fit. RDL can provide suitable lining membrane for most liquid containment solutions and we have extensive experience in the lining of below ground concrete tanks where all surfaces require lining including the roof.
Please contact us if you require any more information.